RESEARCH PUBLICATIONS

Clarify the parameters of “Research Outputs” system categories, so that research outputs and other activities are recorded in a consistent manner across the University

International Journals

  1. Abhijit Dey, Krishna Murari Pandey, “Wire Electrical Discharge Machining Characteristics of AA6061/Cenosphere As-Cast Aluminium Matrix Composites”, Materials and Manufacturing Processes, doi.org/10.1080/10426914.2017.1388517. (SCIE).

  2. Abhijit Dey, Shantanu Debnath, Krishna Murari Pandey, “Optimization of EDM Process Parameters for Al6061/Cenosphere Composite using Grey based Hybrid Approach”, Trans. Nonferrous Met. Soc. China 27 (2017) 998−1010. (SCIE).

  3. Abhijit dey, krishna Murari Pandey, “Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach”,Materials and Manufacturing Processes, doi.org/10.1080 /10426914.2018. 145 3154 (SCIE).

  4. Abhijit Dey, Krishna Murari Pandey, “Characterization of Fly Ash and Its Reinforcement Effect on Metal Matrix Composites: A Review”, Rev. Adv. Mater. Sci. 44 (2016) 168-181. (SCIE)

  5. Abhijit dey, krishna Murari Pandey, “Magnesium Metal Matrix Composites - A review”, Rev. Adv. Mater. Sci. 42 (2015) 58-67. (SCIE)

  6. Amit Kumar Dey, Abhijit Dey, Suchitra Sukladas, “3N Formulation of Horizontal Slice Method (HSM) in Evaluating Pseudostatic Method for the Analysis of Seismic Active Earth Pressure”, International Journal of Geomechanics, ASCE, DOI.10.1061/ (ASCE)GM.1943-5622.0000662. (SCIE)

  7. Mujibur Rahman, Abhijit Dey, Krishna Murari Pandey, “Machinability of Cenosphere Particulate Reinforced AA6061 Aluminum Alloy Prepared by Compocasting”, Part: B, Journal of Engineering Manufacture DOI: 10. 1177/ 0954405417699013, Sage publications. (SCI)

  8. Abhijit Dey, Mriganav Debnath, Krishna Murari Pandey, “Analysis of effect of machining parameters during Electrical discharge machining using taguchi based multi objective PSO”, International Journal of Computational Intelligence and Applications Vol. 16, No. 2 (2017) 1750010. DOI: 10.1142/S1469026817500109.(Web of Science: ESCI)

  9. Abhijit Dey and Krishna Murari Pandey, “Wear behaviour of mg alloys and its composites - a review” accepted for publication in Int. J. Mater. Res. Hanser publication.(SCI)

  10. A.K. Deya,*, U. Kumarb, A. Dey, Use of response surface methodology for the optimization of process parameters for the removal of Congo Red by NaOH treated jute fibre, Desalination and Water Treatment,(SCI) doi:10.5004/dwt.2018.22466.

  11. Pawan Kumar, Manvendra Tiwari, Mamookho Elizabeth Makhatha, Abhijit Dey, Bipin Bihari Verma, Effect of Rate of Loading on Jute Fibre-Reinforced Polymer Composite, Transactions of the Indian Institute of Metals,(SCI) 2020, p. 1-5.

  12. Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, and Bibhuti Bhushan Biswale, Processing of hardened steel by MQL technique using nano cutting fluids, Materials and Manufacturing Processes, SCI (2020), https://doi.org/10.1080/10426914.2020.1832688.

  13. Abhijit Dey, Mrinal Shrivastav, Pawan Kunar, “Evaluation of Optimum Performance Characteristics during EDM of Compo-casted Al6061/Cenosphere AMCs Using Topsis and Vikor Based Multi Criteria Approach”, Part B: Journal of Engineering Manufacture. (Accepted), Sage Publication (SCI).

  14. Abhijit Dey, Shantanu Debnath, Krishna Murari Pandey,“Application of Response Surface Method on Electro Discharge Machining of AA6061–Cenosphere AMCs Prepared by Compocasting Method”, communicated in Review, Surface and Interface.

  15. Abhijit Dey, V. R. Reddy Bandi, Krishna Murari Pandey, “Wire electrical discharge machining characteristics of AA6061/cenosphere aluminium matrix composites using RSM”, Materials Today: Proceedings 5 (2018) 1278–1285.

  16. Abhijit Dey, V. R. Reddy Bandi, Krishna Murari Pandey, “Wire electrical discharge machining characteristics of AA6061/cenosphere aluminium matrix composites using RSM”, Materials Today: Proceedings 5 (2018) 1278–1285.

  17. Abhijit Dey, Mriganav Debnath, Krishna Murari Pandey, “A Hybrid Approach for Multi-Response Optimization of Non-Conventional Machining on Al6061-Cenosphere MMC”, communicated in Journal of cleaner production, Elsevier science, (revised, revision submitted).

  18. Abhijit Dey, Krishna Murari Pandey, Biplob Das, “ANN modelling of ED machining of compo-casted Al6061/Cenosphere MMCs”, communicated in Journal of Intelligent & Fuzzy Systems, IOS press publishers.

  19. Krishna Murari Pandey, Abhijit Dey and Pannalal Choudhury, “Buckling Behaviour of Circular Ring Stiffened Filament Wound Composite Pressure Hull through Finite Element Analysis”, Applied Mechanics and Materials, Vol. 656 (2014) pp 288- 297.(Thomson Reuter and Scopus Indexed)

  20. Abhijit Dey, Subhash Chandra Saha, Krishna Murari Pandey, “Study of Mechanical Properties Change During Friction Stir Spot Welding of Aluminum Alloys”, Current Trends in Technology and Science, Volume: III, Issue: I, January 2014.

  21. Abhijit Dey, Subhash Chandra Saha, “Krishna Murari Pandey, Study Of Micro Structure Change During Friction Stir Spot Welding Of Lap Weld Joint Using Aluminium Alloy”, International Journal of Trends in Economics Management & Technology, Volume II Issue VI, December 2013.

  22. Abhijit Dey, Pannalal Choudhury, Krishna Murari Pandey, “A Computational Study of Buckling Analysis of Filament Wound Composite Pressure Vessel Subjected to Hydrostatic Pressure”, Global journal of research and Engineering, Volume 14 Issue 1 Version 1.0 January 2014,pp:19-26.

  23. Abhijit Dey, Gaurav Chaudhary, Pannalal Choudhury, Krishna Murari Pandey, “Study of Post-Buckling Behaviour of Carbon-Epoxy Composite Pressure Vessel Subjected to Hydrostatic Pressure”, International Journal of Trends in Economics Management & Technology, Volume III, Issue I, February2014, pp: 24-29.

National Journals

  1. Abhijit Dey, Krishna Murari Pandey, Pannalal Choudhury, “Post Buckling Analysis of Circular Ring Stiffened Filament Wound Composite Pressure Vessels by Finite Element Analysis”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-V, special Issue, March 2014,pp:82-86.

  2. Pannalal Choudhury, Gaurav Chaudhary * , Abhijit Dey, Krishna Murari Pandey, “Interlaminar Stress Analysis of Composite Laminates with External Ply-Drop using Finite Element Method”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-V, special Issue, March 2014, pp:75-81.